Barn Doors

LUPA supplies different models of doors, very easily installed and intended for places other than stalls, such as barns, hay lofts, warehouses, tack rooms, offices, sick bays… These doors are supplied upon request and after making an estimate. They can be simple or double, sliding or swinging, made of recycled plastic or tropical hardwood, and they can include many details which make them versatile, practical and extremely good-looking. Below, you will find the characteristics of the most common models.

CORTON SWINGING DOOR

Puerta giratoria para personas, con bisagras y opaca en parte superior e inferior

  • Entrance door for people, tack rooms, offices, sick bays…
  • Fitted with galvanized steel frame and wall frame to build into existing wall.
  • Tongue and groove recycled plastic boards or tropical hardwood, individually fixed with rounded screws.
  • Single leaf door with door knob and key, to be operated from inside and outside.
  • Two adjustable hinges for a perfect adjustment.
  • Hot dip galvanized in accordance with NEN and ISO 1461 standards, with no sharp edges.
  • Dimensions: 120 cm wide and 230 cm high.
  • Options: hardwood treated with Lasur, multi-layer coating of paint over the galvanized coating and special dimensions.

CORTON SWINGING DOUBLE DOOR

Doble puerta giratoria para nave

  • Fitted with galvanized steel frame and wall frame to build into existing wall.
  • Tongue and groove recycled plastic boards or tropical hardwood, individually fixed with rounded screws.
  • Door knob and key, to be operated from inside and outside.
  • Four adjustable hinges for a perfect adjustment.
  • Hot dip galvanized in accordance with NEN and ISO 1461 standards, with no sharp edges.
  • Dimensions: 230 cm wide and 240 cm high.
  • Options: hardwood treated with Lasur, multi-layer coating of paint over the galvanized coating and special dimensions.

CORTON DOUBLE SWINGING DOOR WITH ARCH

Doble puerta giratoria con arco, para entrada de maquinaria en zonas nobles

  • Fitted with galvanized steel frame and wall frame to build into existing wall. The top parts of the door and frames are arched.
  • Tongue and groove recycled plastic boards or tropical hardwood, individually fixed with rounded screws.
  • Door knob and key, to be operated from inside and outside.
  • Four adjustable hinges for a perfect adjustment.
  • Hot dip galvanized in accordance with NEN and ISO 1461 standards, with no sharp edges.
  • Dimensions: 230 cm wide and 250 cm high.
  • Options: hardwood treated with Lasur, multi-layer coating of paint over the galvanized coating and special dimensions.

CORTON OUTDOOR SLIDING DOOR

Puerta para nave exterior corredera con rail superior

  • Steel frame with 28-mm-thick recycled plastic or tropical hardwood boards.
  • Hand grip to be operated from both sides, with built-in slam latch.
  • Top rail, double suspension rollers and bottom guide.
  • Hot dip galvanized in accordance with NEN and ISO 1461 standards, without any sharp edges.
  • Dimensions: 130 cm wide and 250 cm high.
  • Options: hardwood treated with Lasur, matching cover for top rail, multi-layer coating of paint over the galvanized coating and special dimensions.

CORTON DOUBLE SLIDING DOOR

Puerta para nave doble

  • Steel frame with 28-mm-thick recycled plastic or tropical hardwood boards.
  • Hand grip to be operated from both sides, with built-in slam latch.
  • Top rail, double suspension rollers and bottom guide.
  • Hot dip galvanized in accordance with NEN and ISO 1461 standards, without any sharp edges.
  • Dimensions: 260 cm wide and 250 cm high.
  • Options: hardwood treated with Lasur, matching cover for top rail, multi-layer coating of paint over the galvanized coating and special dimensions.


Print   Email